Submersible Water Pump/Solar Water Pumps For Wells/Price Solar Water Pump for Agriculture
Main Data
Bore Hole: 100~350mm
DC220V, 380V, 50/60Hz Electric Driven Deep Well Pump
Material: CI, SS304, SS316, etc
The head of pump would be from the suction hole up to the water level and plus the water leve to the top of well.
The most professional manufacture of submersible pump and motor in china high efficiency, lower noise, long service life ,lower price with good quality. Popular in over 80 countries all over the world.
Brief introduction
The bore well submersible pump unit is composed of the motor and pump together which is placed in the bore well by connecting the motor cable withe the power supply which drives the impeller rotating. It's simple and small light-weight structure easy to maintain.it runs in a good condition and performs well .
This is new highly efficient machine and low cost for water supply. It can be used for drainage in mines,
a city's water supply, clean water ,irrigation and potable water and animals areas lacking water .
Work condition
1.Voltage: 380V
2.Frequency:50HZ(3phase AC)
3.Water temperature≤20°C
4.The sand content of the well water (weight ratio) should not be over 0.01% PH:6.5—8.5.
5.The pump units should be immersed below the dynamic water level.
Structure features
Pump: The pump is installed on the upper part of the pump units. It's centrifugal and has water lubricated bearing mounted with the motor shaft by a joint.
There is a check valve on top of the pump which could prevent rapid inverse rotation from backward flow.
The pump unit should be immersed below the dynamic water level when in using.
Motor: the motor is installed under the pump.
It is a water filled in hermetical structure. The stator windings are water-tight and PE insulating and multi-layers are covered with nylon.
The motor bearing is water-lubricated.
The inner motor contains clean water to cool the water body and the bearing.
The rubber diaphragm adjusts the pressure change caused when temperature rises.
There is a sand resistance system in the upper part of the motor.
| Specification: |
| 1.Inlet/Outlet | 4''(100mm), 6''(150mm), 8''(200mm) |
| 2. Max dia of pump unit | 133mm-281mm |
| 3.Rotary Speed | 2850 |
| 4.Flow Rates | 10 m3/h-360m3/h | 40GPM-1584GPM |
| 5.Head | 30m-320m |
| 6.Horsepower | 2.7HP-300HP |
| 7.Material | cast iron, , stainless steel, cast steel |
| 8.Package | Exporting plywood case |
| 9.Certification | CE,ISO9001:2000 |
Our Services
Samply available: 7~10days. Sample is provide with full total price. Oversea Service could be provided, but you have to bear the freight charge.
Qty: 1pc, only pump head is provided.
Price: US$100~200
OEM is welcome
OEM expierence: more than 10 years.
Countries: Germany, U.S.A, Spain, Italy, United Kingdom etc
Warranty: the whole pump is guaranteed within 1 year, the pump's spare parts are guranteed for 3 months from the date of delivery. If our pump is broken within 3 months, we will provide the new one to you without any delay.
For more information, please do not hesitate to contact me.
FAQ
The information should be including inquiry as following:
1.Pump's flow rate
2.Pump's Head (Pressure)
3.Driven Mode: By electric motor or diesel engine or bare shaft etc
4.Power and rotary speed
5.Suction lift for self priming pump
6.Temperature of liquid if you can provide
Upon the receipt of the pump's parameter, we can send our quotation to you within 24 hours.Or the condition of pump station would be provided.
The information should be including inquiry as following:
1.Pump's flow rate
2.Pump's Head (Pressure)
3.Driven Mode: By electric motor or diesel engine or bare shaft etc
4.Power and rotary speed
5.Suction lift for self priming pump
6.Temperature of liquid if you can provide
Upon the receipt of the pump's parameter, we can send our quotation to you within 24 hours.Or the condition of pump station would be provided.
FAQ
1. Q: Can I know more about your products?
A: Pls view our website: www.lanco.cc
2. Q: What's your MOQ of this item?
A: 1~2PCS
3. Q: What is the lead time?
A: 15~30 days after receiving your payment, it depends on pumps.
4. Q: What is the payment term?
A: Normally T/T in advance or L/C at sight. Others like D/P, Cash, Credit Card
5. Q: what is the product's warranty?
A: The whole pump is warrantee for one year, while the spare parts or wetting parts about pump will be warrantee for 3 months from the date of delivery.
6. Q: Are you a manufacturer or trading company
A: We are a manufacturer specialize in water pump and Other Pumps more than 20 years.
