QBY air operated diaphragm pump are operated with compressed air while the Series DBY electric diaphragm pumps are driven by electric motor.LANKE's hydraulically diaphragm pump work as well as those imported from Germany or USA, suitable for pumping fluids with particles, and various liquids, which are highly viscous, volatile, corrosive or toxic, as well as colloids.
Air operated pump using compressed air as the power source. It can convey corrosive, volatile, flammable, poisonous liquid or fluid with particles and high viscosity liquid etc.
Application
1. The pump can suck the peanut, pickles, tomato slurry, red sausage, chocolate, hops and syrup etc.
2. The pump can suck the paint, pigment, glue and adhesive etc.
3. The pump can suck various glazed slurries of tile, porcelain, brick and chinaware etc.
4. The pump can suck various grinding materials, corrosive agent and clean the oil dirt etc.
5. The pump can suck various toxin and flammable or volatility liquid etc.
6. The pump can suck various wedge water, cement slurry and mortar etc.
7. The pump can suck various strong acid, alkali and corrosive liquid etc.
8. It can be used as a front-step tranmission device of the solid and liquid separation equipment.
Performance parameter
| Model | Discharge | Head | Exit Pressure | Sucked Lift | Grain Dia | Air Pressure | Air consumption | End Connection |
| (m3/h) | (m) | (kgf/cm2) | (m) | (mm) | (kgf/cm2) | (m3/min) | NPT/RC/Flange |
| QBY-10 | 0-0.8 | 0-50 | 6 | 5 | 1 | 7 | 0.3 | 1/2 |
| QBY-15 | 0-1 | 0-50 | 6 | 5 | 1 | 7 | 0.3 | 1/2 |
| QBY-25 | 0-2.4 | 0-50 | 6 | 7 | 2.5 | 7 | 0.6 | 1 |
| QBY-40 | 0-8 | 0-50 | 6 | 7 | 4.5 | 7 | 0.6 | inlet 11/2 outlet 11/4 |
| QBY-50 | 0-12 | 0-50 | 6 | 7 | 8 | 7 | 0.9 | Flange |
| QBY-65 | 0-16 | 0-50 | 6 | 7 | 8 | 7 | 0.9 | Flange |
| QBY-80 | 0-24 | 0-50 | 6 | 7 | 10 | 7 | 1.5 | Flange |
| QBY-100 | 0-30 | 0-50 | 6 | 7 | 10 | 7 | 1.5 | Flange |
Specification
| Inlet/outlet | 10-100mm | 3/8-4 inches |
| Capacity | 0-30m3/h | 16-480 L/Min |
| Head | 0-50m |
| Sucktion Lift | 5-7m |
| Exit Pressure | 6 kgf/cm2 |
| Max Grain Dia | 10mm |
| Max Air Pressure | 7 kgf/cm2 |
| Max Air Consumption | 1.5 m3/min |
| Certification | ISO9001:2008 |
| Pump body | Stainless Steel, Cast Iron, Aluminum, Polypropylene, Engineering Plastic, Cast Iron+Rubber Lined; |
| Diaphragm | NBR,Viton,Neoprene,EPDM,Santoprene,Hytrel,PVDE etc. |
| Material of non-wetted parts | Cast Iron, Aluminum Alloy; |
| | Stainless Steel, Cast Iron, Aluminum, Polypropylene, Engineering Plastic, Cast Iron+Rubber Lined; |
| Material of wetted parts |
Our Services
Samply available: 7~10days. Sample is provide with full total price. Oversea Service could be provided, but you have to bear the freight charge.
Qty: 1pc, only pump head is provided.
Price: US$100~200
OEM is welcome
OEM expierence: more than 10 years.
Countries: Germany, U.S.A, Spain, Italy, United Kingdom etc
Warranty: the whole pump is guaranteed within 1 year, the pump's spare parts are guranteed for 3 months from the date of delivery. If our pump is broken within 3 months, we will provide the new one to you without any delay.
For more information, please do not hesitate to contact me.
FAQ
The information should be including inquiry as following:
1.Pump's flow rate
2.Pump's Head (Pressure)
3.Driven Mode: By electric motor or diesel engine or bare shaft etc
4.Power and rotary speed
5.Suction lift for self priming pump
6.Temperature of liquid if you can provide
Upon the receipt of the pump's parameter, we can send our quotation to you within 24 hours.Or the condition of pump station would be provided.
The information should be including inquiry as following:
1.Pump's flow rate
2.Pump's Head (Pressure)
3.Driven Mode: By electric motor or diesel engine or bare shaft etc
4.Power and rotary speed
5.Suction lift for self priming pump
6.Temperature of liquid if you can provide
Upon the receipt of the pump's parameter, we can send our quotation to you within 24 hours.Or the condition of pump station would be provided.
FAQ
1. Q: Can I know more about your products?
A: Pls view our website: www.lanco.cc
2. Q: What's your MOQ of this item?
A: 1~2PCS
3. Q: What is the lead time?
A: 15~30 days after receiving your payment, it depends on pumps.
4. Q: What is the payment term?
A: Normally T/T in advance or L/C at sight. Others like D/P, Cash, Credit Card
5. Q: what is the product's warranty?
A: The whole pump is warrantee for one year, while the spare parts or wetting parts about pump will be warrantee for 3 months from the date of delivery.
6. Q: Are you a manufacturer or trading company
A: We are a manufacturer specialize in water pump and Other Pumps more than 20 years.
